Mac Os X Seagate Goflex Hard Drive Usb Cable !NEW!
If it was anything other than a Seagate 3TB I might optimistically support your rather hopeful "it's not hardware" assertion.However... -drive-reliability-stats-for-q2-2015/ & previous reports would inspire no confidence in that opinion.
Mac Os X Seagate Goflex Hard Drive Usb Cable
I bought an interim solution, a Seagate FreeAgent GoFlex 3TB drive, which attaches via USB cable. I only have USB2 on my MacBook Pro, so it's working that way, even though the drive supports USB3. I don't have any Thunder on my Pro.
I formatted the drive for use only with the Mac. I find that I can copy files one or a couple at a time from the HD to the GoFlex, but if I launch big "Copy this 6.04GB set of folders over" even when all the files are in the same folder, Finder will process on it for a while, then it will just hang. Sometimes with 2 hours left, sometimes with About a Minute left. The only solution seems to be to unplug the cable. Hitting the X to cancel the copy just hangs forever too. Unmount of the drive doesn't unmount since it's In Use.
...I bought an interim solution, a Seagate FreeAgent GoFlex 3TB drive, which attaches via USB cable. I only have USB2 on my MacBook Pro, so it's working that way, even though the drive supports USB3. I don't have any Thunder on my Pro.
If the drive is bus-powered, try external power, either from a suitable adaptor (if it has an external power port), or from a USB power supply via a USB-Y cable. (Make sure the USB power supply's current spec exceeds the drive's specified requirement by at least 0.2A.)
Seagate external hard drives are known for their unparallel speed and reliable storage features. With the help of Seagate external hard drivers, you can save your favorite music, videos, photos, and other important documents without any hassle. The external hard drives also come in handy while traveling. Under normal circumstances, as you connect the external hard drive to your Mac system, it automatically gets detected. However, there are many cases where Seagate external hard drives do not work in Mac systems. Before jumping into the solutions, it is essential to know the various reasons for connection failure. Some of the general reasons that result in Seagate external hard drive not showing up on Mac are:
Finding the exact cause of the external hard drive not showing up on Mac can be daunting and tedious. You can follow various methods and steps to rectify the problem and use your Seagate external hard drive without hassle.
Sometimes the Seagate hard drive does not show up on Mac because of simple reasons. Either the connection might be lost, or your Mac system might not be able to recognize the hard drive. Here are some of the simple checks you must do to ensure that your Seagate external hard drive is not damaged from inside.
If your Seagate external hard drive is visible in the disk utility, you can take a relaxing breath as your hard drive has no serious problem. In general, cases, mounting the Seagate hard disk makes it accessible. Mostly, the operating system automatically mounts the hard drive when you plug in the USB. However, if your Seagate hard drive is unmounted, you can follow manual procedures to mount the hard drive. Follow the steps mentioned below:
If your Seagate external drive is not showing up on Mac even after mounting the hard drive manually using Disk Utility, your hard drive could have disk errors. To the relief, you can repair your Seagate external hard drive using the native disk repair tool known as 'First Aid'. Follow the steps to repair the hard drive using First Aid.
Even if First Aid fails to repair the Seagate external hard drive, it is advised that you must reformat the external hard drive. To reformat the external hard drive to a Mac-supported file system, follow these steps:
Some of the connection failures of a Seagate external hard drive result in data loss. To the rescue, the EaseUS Data Recovery Wizard for Mac allows users to back up all the important data. The data recovery software by EaseUS supports different kinds of recoveries such as formatted recovery, OS crash recovery, raw recovery, and more. Mac users can recover more than 250 different types of files with the help of EaseUS Data Recovery Wizard. For recovering data from the Seagate external hard drive, users have to follow three simple steps, and the recovery process will begin.
Correctly connect your external hard drive to your Mac. Launch EaseUS Data Recovery Wizard for Mac, and select the external hard drive. Then, click "Search for lost files" to find lost/deleted files on your external devices.
There are multiple reasons which can lead to Seagate external hard drive not showing up on Mac. However, there are ample ways to fix the connection failure problem. If your Seagate external hard drive is not showing up on Mac, you can follow any of the methods listed in the article. If you lose the data in the connection process, you can use the EaseUS Data Recovery Wizard and get back your important data.
As an external hard drive, the $200 GoFlex Satellite features USB 3.0 and offered fast performance in our tests. Supporting both PCs and Macs out of the box, the drive makes a good external hard drive for any user. If you have an iPad and want to carry a large digital content library on the go, the GoFlex Satellite--with an included car charger--also makes an excellent storage extender for your tablet.
As an external hard drive, the GoFlex Satellite is so similar to the GoFlex Ultra-portable--both in the physical look and functionality--that it would be redundant to go into details about how it works.
In a nutshell, like the rest of the drives in Seagate's GoFlex family of portable hard drives, the drive comes in two parts: the hard drive and the adapter. The hard drive is basically just a 2.5-inch internal hard drive housed in a plastic chassis with a small opening to reveal the internal hard drive's standard SATA female connector. The included adapter part has a male SATA connector and a miniUSB 3.0 port. These two parts can be snapped onto each other and fit tightly to form the GoFlex Satellite external hard drive. The drive supports USB 3.0 and comes with a miniUSB 3.0 cable, which serves both as a data and power cable. It also comes with a second separate power cable that can draw power from a USB port of a computer or the included car charger and wall power adapter. The drive will also work with other GoFlex adapters that support other connection types, such as FireWire or eSATA.
The device can stream basically all content supported by the iPad including videos (H.264 video, MPEG-4, and Motion-JPEG), audio (AAC, MP3, Audible (formats 2, 3, 4), Apple Lossless, A IFF, WAV), documents (Microsoft Office, iWork, Adobe) and photos. To get content on the GoFlex Satellite drive, the fastest way is to connect it to a computer and use it as an external hard drive. For iPad users who want to carry their entirely library, just drag and drop the iTunes Music/Media folder onto the drive. The device then automatically detects and organizes new streamable content in to the respective categories to make them available to the GoFlex Media app. Alternatively, if you connect a computer to the GoFlex Satellite's Wi-Fi network, you can also upload content via the Web browser, though this way is much slower.
The GoFlex Satellite can work as either an external hard drive or the Wi-Fi storage extender at a time. This is why the second power cable is necessary. It only charges the device without changing its operation mode. When plugged in to a computer using the USB 3.0 adapter, on the other hand, the drive will automatically work as an external hard drive, though it will also charge it internal hard drive this way.
As an external hard drive, the GoFlex Satellite offered about the same performance as others in the GoFlex portable family in USB 2.0 tests, scoring 28.8MBps and 37.2MBps for writing and reading, respectively, among the top three of the chart. In USB 3.0 tests, on the other hand, the drive, though much faster than when used with USB 2.0, wasn't as fast as most other USB 3.0 we've reviewed, registering 69.3MBps for writing and 76.1MBps for reading. Nonetheless, at these speeds, the drive will work for quickly transferring a large a mount of storage.
ConclusionThe four-star GoFlex Satellite didn't receive our Editors' Choice award only because of its lack of support for Internet access and comparatively low USB 3.0 performance. Nonetheless, at its current state, the device still makes an excellent portable hard drive and a must-have for iPad owners.
Seagate has unveiled a new line of external storage units that promises consumers more flexibility should their requirements change. Dubbed Freeagent GoFlex, they are all plug-and-play devices with interchangeable cables and desktop adapters that allow each drive to adapt to the interface being used (USB, FireWire, eSATA). The idea is that this system not only future-proofs the hard drive, but also allows it to be used on nearly any computer platform.
You can update these portable drives just by swapping out the cable adapter, so a USB 2.0 drive can be upgraded to USB 3.0, eSATA, and FireWire 400/800 connections, or with a cable that can turn the drive into an automatic backup system. Moreover, Seagate is adding a NTFS driver for Mac OS X that will let users store and access files from both Windows and Mac OS X systems.
Prices for desktop GoFlex drives with a USB 2.0 cable and encrypted backup are about $120 for 1TB and $200 for 2TB. A standard ultraportable model ranges from $100 for a 320GB version up to $200 for a terabyte, while the GoFlex Pro ultraportable spins at a faster 7,200 RPM, includes backup with encryption capabilities, and is priced at $130 for 500GB, and $180 for 750GB. The flexibility will come at an extra cost, though, and it's also the drive's biggest flaw.
"I own a Seagate external hard drive that I've been using for more than a year. Yesterday it suddenly started making beep noises when I plugged it into my PS4. What do I do to get rid of this annoying sound?"